-40%
Upgrade wiring kit Pre-wired fits Fender Stratocaster; K40Y-9 PIO cap CTS pots
$ 30.09
- Description
- Size Guide
Description
BEFOREBIDDING
make sure to READ
all text below, look at all the pictures, and review
shipping costs and return polic
y. Thank
you!
"Vintage Relic (made in USA) pre-wired upgrade kit fits
Fender Stratocaster
. New. This is the best and most economical way to improve the tone of your USA Custom Shop or Mexican Strat!
3 CTS 250k split shaft pots
(10% tolerance)
.
We measure each pot and use ones with higher readings for the volume pot.
1 Fender 5-way control switch
.
Includes a white
plastic switch tip
.
1 NOS PIO (paper in oil) tone capacitor.
New old stock Russian .047uF 200V capacitor. We add cloth shielding to the terminals to prevent a "ground out." These are GREAT sounding caps. TONE!!
All cloth vintage style 22 ga push back wire.
"Normal" Strat wiring (tone for neck and middle pickup only).
If you want tone control for the bridge pickup, in addition to or instead of the middle pickup, we can wire it that way for you.
Ground wire soldered to the volume pot.
Pre-tinned (soldered) lugs on the control switch where the pickups attach.
Mounted on a Fender '57 aluminum control shield
(
Fender P.N. 001-9640-000
)
.
Wiring diagram included."
Distance between the components (center to center); if you need different spacing, let us know:
switch to volume = 2.0"
volume to tone 1 = 1.75"
tone 1 to tone 2 = 1.75"
Above text and pictures copyright Vintage Relic. All rights reserved.
Pot specs:
Tolerance = +/- 10%
Can Size = 15/16 in. radius X 3/8 in. height
Bushing Threads = 3/8-32
Bushing Height = 3/8 in.
Shaft Type - split
Shaft Diameter = .238 in (6.3mm)
Spline Count = 24 (NOT metric)
Shaft Length - 3/8 in.
Hole size requirement = 3/8 in.
Value = 250K Ohms