True Bypass Stomp Switch Footswitch with PCB for easy jack & LED wiring

Description

Here is listing for the 3PDT footswitch mounted on the tiny PCB for easy pedal wiring: connection of the jacks, led, power source and effect.
This PCB is the central hub of the pedal box, it is very convinient for assembly and modification: effect part connected only with 4 wires (IN, OUT, GND, Power).
PCB mounted 1 kOhm resistor - you need to connect only LED on your choice.
Two variants of the power source connection: with constant effect power (for wall adapter) and with power on by the input jack insertion (for battery).
Effect input in bypass mode is connected to the ground to eliminate sound pop when switch is pressed
PCB dimensions: 0.86x1 inch (22x25mm)
May be used for negative or positive power ground, i.e. for classic germanium PNP transistor effects.
PCB connections marked on both PCB sides (and yes, it is significant, when switch is mounted in the box! :-) )