Premium Wiring Harness for Stratocaster CTS 275k (9% Tol) Custom Pots CRL Switch

Description

New Premium Wiring Harness for Stratocaster CTS, Orange Drop 5 Way CRL Treble Bleed
This is a pre-wired Stratocaster wiring harness upgrade for American or Mexican Fender Stratocasters.
These are the highest quality Potentiometers that the CTS Corporation manufacture.
WD® Music Products developed these high-quality split-shaft potentiometers with CTS® to offer you exceptional performance in electronics for your instrument. These are NOT the same CTS pots that other companies stock and sell. These are developed using 9% +/- tolerances and a value at 10% over the standard 250K rating (275K). This ensures you not only optimum performance but guarantees your potentiometers will always be at least the value stated unlike many others using 20% tolerances where you can be over spec but in most cases way under the specifications you need to ensure good tone from your pickups. They added brass components and a high quality wiper versus what comes standard on most run of the mill pots to ensure long life, quality and consistent performance.
Pot Specs and Dimensions:
Value 275k
Tolerance = +/- 9%
Bushing Threads = 3/8-32
Bushing Height = 3/8 in.
Shaft Type - split
Spline Count = 24
Shaft Length - 3/8 in.
Hole size requirement = 3/8 in.
2 nuts and 2 washers per pot.
Original CRL 5-way USA Switch (
Considered by most guitarists and guitar builders as the 1st choice for a Stratocaster)
3 x CTS 275K Pots with Brass split shafts and Brass bushings.
Sprague 400v .033uF
Orange Drop Capacitor (We also offer an Orange Drop .047uf or a .022uf capacitor) Let me know at checkout if you need either the .047 or .022 cap)
Gavitt Vintage Style Cloth covered push-back Wire
Switchcraft Jack
Volume Treble Bleed Mod (150k-ohm Stew-Mac resistor and .001uF Cap)
We also add 2 ground wires from the volume pot. One for your Tremolo Claw and one for your pickup grounds.
We no longer include the
Genuine Fender
Stratocaster Aluminum Shield, for mounting the harness under your pickguard. Fender's new policy is, they are not supplying wholesale parts anymore and we have used up our stock. (As yet, I have not updated the images in the listing)
Atlantic Custom Guitars hand wired Strat harness featuring all top shelf components. It's pre-wired and ready to drop into your guitar to upgrade your tone.
We use an Orange Drop 0.033uf as standard.
The front tone is wired for the neck pickup. For the bottom tone we wired a jumper into the circuit, to control both the middle and bridge pickups.
(
A stock Stratocaster does not have tone for the bridge).
Bench tested and guaranteed 100% working. After building it, we hook it up to a Strat in our shop and do a complete test.