Premium Epiphone Les Paul Wiring Harness Custom CTS 550k Pots 9% Tolerance

Description

Premium Harness for Epiphone Les Pauls. With this harness, we have built it using the highest quality potentiometers that the CTS Corporation manufacture.
WD® Music Products developed these high-quality potentiometers with CTS® to offer you exceptional performance in electronics for your Les Paul and other carved-top instrument requiring the shorter 3/8" bushing/shaft length. These are NOT the same CTS pots that other companies stock and sell. These are developed using 9% +/- tolerances and a value at 10% over the standard 500K rating (550K). This ensures you not only optimum performance but guarantees your potentiometers will always be at least the value stated unlike many others using 20% tolerances where you can be over spec but in most cases way under the specifications you need to ensure good tone from your pickups. They added brass components and a high-quality long-life wiper versus what comes standard on most run of the mill pots to ensure long life, quality and consistent performance. WD spared no expense and thought of everything whilst working with CTS, right down to chamfering the tops of brass shafts, making it easier to install your guitar knobs.
SPECS:
Set of 4 Premium CTS 500k Pots
Value = 550k Ohms
Tolerance = +/- 9%
Can Size = 15/16 in. radius X 3/8 in. height
Bushing Threads = 3/8-32
Bushing Height = 3/8 in.
Shaft Type - split
Shaft Diameter = .238 in (6mm)
Spline Count = 24 (NOT metric)
Hole size requirement = 3/8 in.
1 nut and 2 washers per pot
2 x Orange Drop 200v .022uf Capacitors
Gavitt Premium 22 Gauge Vintage Style Push Back Cloth Covered Wire.
1 x Link to my On-line Wiring Diagrams
1 x Assembly Template
This harness uses Short Shaft Pots and will fit most Epiphone and Imported Les Paul's.
You may have to enlarge the holes for the pots to 3/8 inch and you might have to change out your knobs because most Epiphone and Imported pots use a smaller hole and also metric pots use 18 spline knobs whilst USA pots use 24 spline knobs. If you have questions, please contact me.