Guitar Parts Electronics ACTIVE CIRCUIT - ARTEC BCU - ONBOARD - Tone Expander

Description

Onboard Modulation chip that simulates non db change tone like onboard wah pedal
Artec Band Control Unit (BCU)
Active Guitar Expander Unit
This is the Artec Band Control Unit. The "
BCU
" is a built-in "Cure All" for tone junkies. First of all, this multi tasking unit features a push/pull on/off sending the unit to a true bypass mode when you push/pull on your knob. When in the "on" position, the knob functions as a Tone Expander. In the center (knob at about 5), it is a
Harmonic Boost
(adds lots of
Sustain
, and
Harmonic Boost
, with a slight mid-high band shift on the EQ). As you turn your knob down, you increase the
Midrange
in your sound. Giving you enough chunk to make a single coil sound as thick as a humbucker. However, if you turn the knob in the other direction, you boost the
High
&
Low
end of your tone (Scooping the Mids, like a
"V" shaped EQ
). This is very similar to the mod used by such legends as Eric Clapton. Easy installation with any Passive or Active pickups in your
Guitar or Bass
(no modification needed, as it just replaces one of your tone pots). Powered by a 9v battery (1 battery will last more than 4000 hours!!!). You will receive the
Unit itself
, as it is pictured, with a
Battery Clip
, &
Stereo Input Jack
(incase the one you have on your guitar is Mono), as well as a wiring installation wiring diagram (very easy to follow). If you have any questions, feel free to contact us.
Click below for Demo: